BFAudioPro B&W 6.0

Liên hệ để biết giá
B&W6.0
Còn hàng
Guaranteed Minimum Power B&W 5.0 B&W6.0 B&W 8.0 B&W 15.0 Turbo
8 ohm stereo(per channel) (1kHz(EIA) with 0.5% THD) 500W 600W 800W 1520W
4 ohm stereo(per channel) (1kHz(EIA) with 0.5% THD) 700W 1000W 1200W 2300W
8 ohm bridge mono (1kHz(EIA) with 0.5% THD) 1200W 2000W 2400W 4600W
Performance
Frequency Response(at 1 Watt) 31dB 33dB 35dB 38.3dB
Total Harmonic Distortion(THD) < 0.5%,20Hz-20kHz

Intermodulation Distortion(IMD)

60Hz and ?kHz at 4:1,from full rated output to -30 dB

0.35%
Slew Rate > 10V/us
Voltage Gain 20Hz-20kHz, +0 /-1dB
Damping Factor(8 ohm),10Hz-400Hz > 200

Signal-to-Noise Ratio

(below rated power,20Hzto 20kHz,A- weighted)

>100dB

Crosstalk(below rated power) Al 1 kHz

At 20 kHz

-75dB

-59dB

Input Sensitivity for full rated power at 8 ohm 0.775V or 1.4V

Input lmpedance(nominal) Balanced

Unbalanced

20k ohm 10k ohm
Connectors, Controls and Indicators  
Input Connectors One balanced XLR
Output Connectors(Speaker Connectors) 4-POLE Speakon and one pair Binding Post per channel
Front Panel Controls Power on/off switch, one gain control per channel
Rear Panel Controls Power on/off switch, one gain control per channel Input sensitivity switch: 0.775 V or 1.4V
Power Indicator

One red LED of work

One green LED per channel One yellow LED per channel

One red LED per channel

Construction
Protection Protection against short circuits, no-load, on/off muting, Rf interference. Stable into reactive or mismatched loads
Ventilation Flow-through ventilation from front to back
Cooling speed regulated, thermal protection
Dimensions(WxHxD) 482x88x231mm'
Net Weight 7.2Kg
Shipping Weight 9.2Kg