MARANI DPA480P

Ứng dụng cho âm thanh chuyên nghiệp

Liên hệ để biết giá
DPA480P
Còn hàng

 

Hệ thống quản lý loa kỹ thuật số 4-IN/8-OUT tiết kiệm chi phí
Được thiết kế để phục vụ cho bất kỳ cấu hình phân tần nào, nó cung cấp khả năng xử lý và điều khiển phù hợp cần thiết cho cả việc sử dụng cài đặt trực tiếp và cố định
Nó cung cấp 4 đầu vào analog, 8 đầu ra analog, được quản lý bởi Công cụ MARANI® DSP mạnh mẽ, bên cạnh Bộ chuyển đổi AD/DA 24 bit hiệu suất cao
Mỗi kênh đầu vào cung cấp lựa chọn EQ với EQ tham số 30 băng tần, Điều khiển khuếch đại, Tiếng ồn Chức năng cổng, Máy nén RMS và Độ trễ có thể định cấu hình
Mỗi đầu ra cung cấp tối đa 7 dải cân bằng tham số, ngoài ra còn có các bộ lọc phân tần tự cung cấp độ dốc từ 6dB/Quãng tám lên đến 48dB/Quãng tám
Mỗi đường dẫn đầu ra cũng có Bộ giới hạn đỉnh, Bộ lọc HP/LP và Độ trễ căn chỉnh trình điều khiển
DPA480P hỗ trợ chế độ trộn ma trận đầy đủ trong đó các đầu vào có thể được định tuyến/trộn theo bất kỳ tỷ lệ nào với bất kỳ đầu ra nào Để cấu hình và điều khiển từ xa, có thể kết nối DPA480P qua kết nối USB hoặc RS485 Phần mềm PC điều khiển từ xa cho phép điều khiển đồng thời tới 32 thiết bị, cài đặt tất cả các tham số và hiển thị các mức thời gian thực

OVERVIEW

DPA480P is a cost-effective 4-IN/8-OUT digital speaker management system. Designed to be catered for any crossover configuration, it provides the suitable processing and control necessary for both live and fixed installation use. It offers 4 analog inputs, 8 analog outputs, managed by a powerful MARANI®  DSP Engine, in addition to high performance 24 bit AD/DA Converters.

Each input channel provides a choice of EQ with 30-band Parametric EQ, Gain control, Noise Gate Function, RMS Compressor and configurable Delay. Each output offers up to 7-band of parametric equalization, in addition to the crossover filters which themselves provide slopes from 6dB/Octave up to 48dB/Octave. Each output path also features Peak Limiter, HP/LP Filters and driver alignment Delay.

The DPA480P supports a full matrix mixing mode where inputs may be routed/mixed in any ratio to any output. For remote configuration and control the DPA480P can be connected via USB or RS485 connections. The control remote PC software allows simultaneous control up to 32 units, setting all parameters and showing real time levels.

FEATURES

Outstanding Performance

Excellent sonic performance with 24bit high end converters coupled with 96kHz sample rate 

4 inputs, 8 outputs with full matrix mixing

Top-grade DSP Engine

30 band parametric equalization per input channel

7 band parametric equalization per output channel

Each band can be switched to Bell, Hi/Lo-Shelving, HP/LP, Band Pass, Notch and All Pass filters

Crossover filters with slopes from 6dB/Octave up to 48dB/ Octave including Butterworth, Bessel, Linkwitz-Riley

Each output features a precision dynamic range controller composed of a Peak Limiter

Adjustable Delay time up to 420.998 ms for every input and up to 128.998 ms for each output channel

 

Direct PC/Network Connection

 

Front panel USB connector for direct PC communications

RS485 connection for system setup, monitoring and control via fully manageable remote PC software

Control

Front panel interactive LCD display for local access and configuration

Front panel 7-LED level meter indicators per channel

Simultaneous control up to 32 units via PC software

Up to 24 storable user presets

Security Lockout

 

SPECIFICATIONS

AUDIO

Analog Input 4 x XLR electronically balanced

Analog Output

8 x XLR electronically balanced
Minimun Load 150 ohm
THD+N 0.004% at 1kHz +4dBu
S/N >106 dB A weight  22kHz BW
Frequency Response 20Hz – 20kHz; -0.5dB
AD & DA Converters 24bit - 96kHz

DSP & PROCESSING

 

DSP Engine MARANI® DSP
DSP Resolution

24bit (data) x 24 bit (coeff.), 54 bit accumulation registers

96 bit precision on intermediate processing data

Parametric Equalization

30 filters per input

7 filters per output

Filter Type

Bell, Hi/Lo-Shelving, HP/LP, Band Pass, Notch and All Pass Filters selectable 

Filter Gain

From -15dB up to +15dB by 0.5dB resolution steps

Input&Output Level From -18dB up to +18dB by 0.1dB resolution steps
Center Frequency Selectable with a 1/48th of octave resolution step from 20Hz up to 20kHz
Filter Q/BW

Shelving/HP/LP Q from 0.1 up to 5.1;
BP/Notch/All Pass Q from 4 up to 104
Bell Q from 0.4 to 128

Crossover Section HPF/LPF Butterworth 6/12/18/24 dB per octave
Bessel 12/24 dB per octave
Linkwitz-Riley 12/24/36/48 dB per octave
Input Noise Gate

Threshold from -80dBu up to -50dBu

Attack time from 1ms up to 1000ms;Release time from 10ms up to 1000ms

Input RMS Compressor

Threshold from -14dBu up to +16dBu and Byp

Ratio 2:1~32:1; Knee: 0% ~ 100%; Makeup from -12dB to +12dB

Attack time from 5ms up to 200ms;Release time from 0.1 sec up to 3 sec

Output Peak Limiter

Threshold from -14dBu up to +16dBu and Byp

Attack time from 1ms up to 900ms;Release time from 0.1 sec up to 5 sec  

Input/Output Polarity

Normal (0°) / Inverted (180°)

Input/Output Mute

Off / On

Delay

420.998 ms per input channel

 

128.998 ms per output channel

GENNERAL

Device Presets

24 User Presets
Front Panel 2x24 character LCD display with green LED backlight
7-LED meter per input channel -20dBu to +15dBu, clip
7-LED meter per output channel -15dBu to +15dBu, clip or limiter mode
Blue LED (Edit) and Red LED (Mute) per channel
NAV/PM1 Rotary encoder push button switch
PM2, PM3, ENTER, ESC, UTILITY push button switches
EDIT/MUTE push button per channel
USB type B connector
Rear Panel 4 x XLR female connector (Input)
8 x XLR male connector (Output)
2 x RS485 Connector
1 x Ground-lift toggle switch
IEC C13 16A connector; Power on/off switch
Main AC 90-240VAC (50/60Hz) – 40W
Dimensions 19”x 1.75”x 9” (483x44x225mm) 1RU
Package size 560x320x110(mm)
Weight, Net / Shipping  6.61 lbs (3.0 Kg) / 7.11 lb (3.5 Kg)

Phần mềm DPA480P (SetupDPA480Pv3.0.9.rar, 4,072 Kb) [Tải về]

DPA480P_User_Manual (DPA480P_User_Manual1.pdf, 588 Kb) [Tải về]

DPA480P cataloge (DPA480P_cataloge.pdf, 582 Kb) [Tải về]